PotteryTech

Bullers™ Rings Analysis Report
Operator:
Kiln:
Load:
Batch Code:
Product:
Target:
Avg Temp
-
Avg BRV
-
Span
-
Target
-

Temp by Ring

Target Tolerance

Δ Deviation

Compass Radar

Distribution Cloud

Data Table

#LabelBRVTemp (°C)StatusTol StatusLayerPos
Notes:
Made for ceramicists • PotteryTech.net

Firing Diagnostic & Tuning Guide

PotteryTech Analytics

This report breaks down the extreme temperature variations in your firing and provides actionable suggestions for adjusting your programmer to achieve a more balanced heatwork.

Primary Hot Zone

Location:

Temp:

This is the area that received the most heatwork in the firing.

Primary Cold Zone

Location:

Temp:

This area struggled to reach maturity compared to the rest of the kiln.

Temperature Span

Total Variance:

Tuning Recommendations

Target Tolerance Chart

Deviation Graph (Visual Hot/Cold Spots)

Compass Radar (Door/Edge Bias)

Note: These are algorithmic suggestions to assist tuning. Always consult your kiln manufacturer's manual. • PotteryTech.net
PotteryTech Bullers™ Rings
Avg Temp
—
Avg BRV
—
Span
—
Target
—
CALIBRATION OFFSET APPLIED

Temp by Ring

CALIBRATION OFFSET APPLIED

Target Tolerance

Deviation from Target Temp (bars inside green lines are within tolerance).

CALIBRATION OFFSET APPLIED

Distribution & Outliers

Cloud spot view. Dots show individual rings.

CALIBRATION OFFSET APPLIED

Δ Deviation

Deviation from layer average.

CALIBRATION OFFSET APPLIED

Compass Radar

CALIBRATION OFFSET APPLIED

Heat Map

Ring Comparison

vs
Select rings to compare...

Layer Averages

Parsed Data (Editable)

#LabelBRVTempStatus LayerBattPosName

Notes

Need another utility?

Done analyzing your rings? Head back to the main tools page to access your other utilities like the Glaze Log Book or Kiln Simulator Pro.

Back to Tools
Heatwork Logo