Kiln Firing Logger
1. Define The Schedule (The Plan)
Enter the details of your firing and the segments from your controller.
Session Information
Segments
Segments: 0
Logs: 0
| # | Start | Target | Speed | Hold | Action |
|---|
2. Cone Helper
Don’t know the exact temp? Select a cone number.
—
3. Live Log (The Reality)
Enter the current time and temp. This creates the Red Solid Line so you can compare it against the blue plan.
Comparison Graph
Blue Dashed = Plan | Red Solid = Reality
Data Tools
Session Saves
| Elapsed Time | Wall Time | Temp | Clay | Glaze | Notes | Action |
|---|
Firing Log Sheet
Date:
Kiln:
Technician:
Job Details:
Cone Target: ___________
Clay Body: _______________________
Glaze Load: ______________________
Cone Target: ___________
Clay Body: _______________________
Glaze Load: ______________________
Pre-Firing Checklist:
[ ] Shelves Kiln Wash Good
[ ] Cones Placed Correctly
[ ] Lid/Door Secure
[ ] Vent Fan ON
[ ] Shelves Kiln Wash Good
[ ] Cones Placed Correctly
[ ] Lid/Door Secure
[ ] Vent Fan ON
1. Planned Schedule
| Segment | Start (°C) | End (°C) | Rate | Hold (Min) |
|---|
2. Firing Profile (Graph)
3. Manual Recording Log
| Time | Temp (°C) | Observations / Notes |
|---|---|---|
Post Firing Result: Success / Fail
Notes: __________________________________________________________________________
Notes: __________________________________________________________________________
